Description
3/8″ – Garage Door Track Bolt
3/8″ 16x 3/4″ Pan Head Bolt
Diameter: 3/8″
Diameter-Thread Size: 3/8″ 16x
Finish: Plain
Grade: 16
Head: Round – Slotted
Length: 3/4″
Material – Steel – Zink coated
Thread: Coarse Thread
Size: 16
Thread Type: Full Thread
Type: Pan Head Bolt – Splined
Check out are full line of garage door, garage door opener, and gate fasteners here – GARAGE DOOR FASTENERS
Typically garage door track bolts are 1/4″, this is a bigger, 3/8″ track bolt.
We carry this size bolt with a square shoulder as well.
Splines will draw into the material when nut is tightened, the head draws tight to the materiel the bolt is passing through giving a near flush finish. The head of the bolt will draw into most material. Good to use in applications where a bolt head will be in the way when installed. Can be used in many applications. On Garage Doors we use these as track bolts on 3″ Track or heavy 2″ Track, bearing plates to clear the cable drums. Have had applications when the bolt was needed to mount torsion springs to the center bearing plate. This a good item to have a few of on hand in the shop or on the truck, hard to find in hardware stores or box stores.
We also stock a longer 3/8″ track bolt, 3/8 x 1-1/2 – same splined head for recessed mounting
Always in stock and we can provide in bulk – email for a quote.
3/8″ – Garage Door Track Bolt
